Sodium Carbonate FCC BP Ph Eur USP NF Manufacturers

We are is manufacturers of Sodium Carbonate FCC Food Grade BP Ph Eur USP NF Reagent, Pharmaceutical Excipients in India. We offer Halal and Kosher Sodium Carbonate FCC Food Grade BP Ph Eur USP NF Reagent made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Sodium Carbonate FCC Food Grade BP Ph Eur USP NF Reagent Manufacturers

Sodium Carbonate USP NF Grade Specifications
Na2CO3 (anhydrous) 105.99
Carbonic acid, disodium salt.
Disodium carbonate CAS Number 497-19-8
Monohydrate 124.00 CAS Number 5968-11-6

It is anhydrous or contains one molecule of water of hydration. It contains not less than 99.5 percent and not more than 100.5 percent of Na2CO3, calculated on the anhydrous basis.

Identification: It responds to the tests for Sodium 191 and for Carbonate.
Water: Dry about 2 g, accurately weighed, at 105 for 4 hours: the anhydrous form loses not more than 0.5%, and the hydrous form between 12.0% and 15.0%, of its weight.
Heavy metals: the limit is 0.001%.

Sodium Carbonate FCC Food Grade Specifications
Soda Ash
Na2CO3 Formula wt, anhydrous 105.99
Na2CO3·H2O Formula wt, monohydrate 124.00
Na2CO3·10H2O Formula wt, Decahydrate 286.14
INS: 500(i) CAS: anhydrous 497-19-8
CAS: monohydrate 5968-11-6
CAS: decahydrate 6132-02-1

DESCRIPTION
It occurs as colorless crystals or as a white, granular or crystalline powder. It is anhydrous or may contain 1 or 10 molecules of water of hydration. It is freely soluble in water and insoluble in ethanol. Its solutions are alkaline to litmus. The anhydrous salt is hygroscopic, and the two hydrates are efflorescent. The decahydrate melts at about 32°.
Function: pH control.

REQUIREMENTS
Identification: A sample gives positive tests for Sodium and for Carbonate.
Assay: Not less than 99.5% and not more than 100.5% of Na2CO3 after drying.
Lead: Not more than 4 mg/kg.
Loss on Drying Anhydrous: Not more than 1%; Monohydrate: Between 12.0% and 15.0%; Decahydrate: Between 55.0% and 65.0%.

Sodium Carbonate Decahydrate BP Grade Specifications
Na2CO3-10H2O -- 286.1 -- CAS 497-19-8

CHARACTERS
Appearance: White or almost white, crystalline powder or colourless, transparent crystals, efflorescent.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).

IDENTIFICATION
A. Dissolve 1 g in water R and dilute to 10 ml with the same solvent. The solution is strongly alkaline.
B. The solution prepared for identification test A gives the reaction of carbonates.
C. The solution prepared for identification test A gives reaction of sodium.

TESTS
Solution S: Dissolve 5.0 g in portions in a mixture of 5 ml of hydrochloric acid and 25 ml of distilled water. Heat the solution to boiling and cool. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 50 ml with distilled water.
Appearance of solution: The solution is clear and not more intensely coloured than reference.
Dissolve 4.0 g in 10 ml of water.
Alkali hydroxides and bicarbonates: Dissolve 1.0 g in 20 ml of water, add 20 ml of barium chloride solution and filter. To 10 ml of the filtrate add 0.1 ml of phenolphthalein solution. The solution does not become red. Heat the remainder of the filtrate to boiling for 2 min. The solution remains clear.
Chlorides: Maximum 50 ppm.
Sulphate: Maximum 100 ppm, determined on solution S.
Arsenic: Maximum 2 ppm, determined on 5 ml of solution S.
Iron: Maximum 20 ppm.
Heavy metals: Maximum 20 ppm.

Sodium Carbonate Monohydrate BP Grade Specifications
Na2CO3-H2O -- 124.0 -- 5698-11-6

CHARACTERS
Appearance: White or almost white, crystalline powder or colourless crystals.
Solubility: Freely soluble in water, practically insoluble in ethanol (96 per cent).

TESTS
Solution S: Dissolve 2.0 g in portions in a mixture of 5 ml of hydrochloric acid and 25 ml of distilled water. Heat the solution to boiling and cool. Add dilute sodium hydroxide solution until the solution is neutral and dilute to 50 ml with distilled water.
Appearance of solution: The solution is clear and not more intensely coloured than reference solution.
Dissolve 2.0 g in 10 ml of water.
Alkali hydroxides and bicarbonates: Dissolve 0.4 g in 20 ml of water R, add 20 ml of barium chloride solution and filter. To 10 ml of the filtrate add 0.1 ml of phenolphthalein solution. The solution does not become red. Heat the remainder of the filtrate to boiling for 2 min. The solution remains clear.
Chlorides: Maximum 125 ppm.
Sulphate: Maximum 250 ppm, determined on solution S.
Arsenic: Maximum 5 ppm, determined on 5 ml of solution S.
Iron: Maximum 50 ppm.
Dilute 5 ml of solution S to 10 ml with water.
Heavy metals: Maximum 50 ppm.

Sodium Carbonate Monohydrate Analytical Reagent Grade Specifications
Na2CO3-H2O
Formula Wt 124.00
CAS Number 5968-11-6

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 5 ppm
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.004%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.03%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%

Sodium Carbonate, Anhydrous Analytical Reagent Grade Specifications
Na2CO3
Formula Wt 105.99
CAS Number 497-19-8

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on heating at 285C: 1.0%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.003%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Calcium (Ca): 0.03%
Magnesium (Mg): 0.005%
Potassium (K): 0.005%

Sodium Carbonate Alkalimetric Standard Analytical Reagent Grade Specifications
Na2CO3
Formula Wt 105.99
CAS Number 497-19-8
NOTE. For use as an alkalimetric standard this reagent should be heated at 285C for 2h.

MAXIMUM ALLOWABLE
Insoluble matter: 0.01%
Loss on heating at 285C: 1.0%
Chloride (Cl): 0.001%
Nitrogen compounds (as N): 0.001%
Phosphate (PO4): 0.001%
Silica (SiO4): 0.005%
Sulfur compounds (as SO4): 0.003%
Ammonium hydroxide precipitate: 0.01%
Heavy metals (as Pb): 5 ppm
Iron (Fe): 5 ppm
Potassium (K): 0.005%
Calcium (Ca): 0.02%
Magnesium (Mg): 0.004%

Sodium Carbonate FCC Food Grade BP Ph Eur USP NF Reagent manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564 - FAX: 91-22-23728264